top of page

CNC Cylindrical Grinders

CNC Cylindrical Grinder 1

ProGrind CNC OD Grinders are designed to use conventional, CBN or diamond grinding wheels.  They are available in standard and universal configurations.  ProGrind CS CNC cylindrical grinder is the standard and has a fixed spindle orientation.  ProGrind CSU has a spindle that can be rotated between 0 and 30°.  Both CNC cylindrical grinders can be used for working between centers or chucking.  Both feature a workhead that can be used for either live or dead center grinding.  Both models feature a full wet grinding enclosure and touchscreen interface

ProGrind CS CNC OD grinder in standard configurations

PGCS CNC cylindrical grinder with chuck

Model CS CNC cylindrical grinder shown with a precision chuck on the workhead.  The workhead can rotate up to 3,000 RPM.  Positioning workheads are also available with .001 degree resolution.

PGCS CNC cylindrical grinder between centers

Model CS shown working between centers.  It is available with a workhead that can use live or dead centers.  Tailstocks can be manual or automatic 

ProGrind CSU in straight or angular contact modes

PGCSU set at 0 Degrees
PGCSu  set at 30 Degrees

ProGrind cylindrical grinders are available with many options, including:

Robot loading

Combo live or dead center workhead

Positioning workhead

High speed workhead

In process gauging

Gap elimination

Rotary diamond dressers

Precision air chucks and collet chucks

Model CSU CNC cylindrical grinder with spindle set at 0°.  It is shown using both a collet chuck and tailstock.  Also shown is in-process gauging for precise diameter control.

Model CSU with spindle set at 30°.  For grinding shafts with shoulders.  Shown with in process gauging, a special chuck for grinding jet engine components and a tailstock.  At the right is a rotary diamond dresser. 

bottom of page